3D digitisation of heritage: churches, museums and monuments in Portugal
Notre-Dame was rebuilt with the help of a laser scan made nine years before the fire. Why 3D digitisation matters now, the EU 2030 targets and what Portugal is doing, which method to choose, what to ask for in a project, and the permissions involved.
- Published
- Reading
- 5 minutes
- Topics
- Heritage
3D Capture
Portugal
Guide - Written by
- Pedro Thomaz
- Discipline
- 3D / Virtual Reality
- Share
In 2010, the researcher Andrew Tallon laser-scanned Notre-Dame de Paris. Nine years later the cathedral burned, and the architects in charge of the reconstruction used that scan to design the timber centering and rebuild the vaults. One of them said the scan enabled them to reconstruct the vaults without any hesitation (Vassar College). It is the best argument for 3D digitisation of heritage: the record made today is what lets you protect, study and, if needed, rebuild tomorrow. This guide is for municipalities, museums, parishes and anyone managing heritage in Portugal.
Why now
The European Commission recommends that, by 2030, Member States digitise in 3D all monuments and sites at risk and half of the most visited ones (Recommendation (EU) 2021/1970). Portugal is already on it. The Património Cultural 360® project, run by the national heritage institute Património Cultural, I.P., with Museus e Monumentos de Portugal and NOVA FCT, and funded by the recovery plan (PRR), has digitised more than 42,000 objects and created 4,200 3D models, available on the Arquiva portal. A laser survey of 35 listed buildings is also under way, including the National Museum of Ancient Art, Alcobaça Monastery, the Palace of the Dukes of Braganza and Évora Cathedral.
The great national monuments are being covered. Parish churches, chapels, municipal museums and castles run by town councils, in many cases, are not yet.
What it is for
- Record and preservation: a measurable portrait of the monument as it stands today, to monitor decay, plan works and, in the worst case, rebuild.
- Access: opening what doesn't open every day. In our captures for the Portuguese Army, the Military Academy, the Military Museum of Lisbon and the room where the 25 April revolution began became walkable for anyone (see the case).
- Tourism, schools and the diaspora: Castelo de Castro Marim, captured in 2021 across 14,000 m², is used by the council's tourism team, by schools as a teaching resource, and by emigrants who knew the castle only from stories.
- Technical use: at the Teatro Nacional D. Maria II, touring companies measure the stage, fly tower and backstage before arriving in Lisbon, and the capture is the baseline for checking changes after the renovation.
- What is temporary: an exhibition has an end date. SONAE's Roy Lichtenstein exhibition can still be visited after the works went home.
Which method
- Laser scanner: the best geometric accuracy, and the one that copes with large scale, sunlight and uneven stone. At Castro Marim we used a Leica BLK360 because standard Matterport equipment couldn't reach that scale.
- Photogrammetry: 3D models from many photographs, with very faithful texture and colour. Great for objects, façades and altarpieces.
- Matterport and 360° tours: the fastest route to a walkable tour and reasonable interior measurements. Better for access and tourism than for research.
- Drone: roofs, towers and surroundings that no ground equipment sees. In Portugal it needs an AAN authorisation to capture images, as we explain in drones in Portugal.
The right answer is often a combination: laser for geometry, photography for colour, drone for the exterior. What decides it is the use. A record for building works needs accuracy; a tour for schools needs to be light and easy to follow.
What to ask for in a digitisation project
- Open formats: the base data in formats that don't depend on one program or platform, such as E57 or LAS for point clouds and OBJ for meshes. Historic England's laser scanning guidance advises avoiding proprietary formats. The beautiful tour lives on a platform; the record has to outlive it.
- Metadata and a record of the method: when, with what equipment, at what accuracy, and what was done to the data. Without it, in ten years nobody knows what the model is worth.
- Separate evidence from hypothesis: in a virtual reconstruction, what exists and what is imagined must be distinguishable. It is one of the principles of international charters such as the London Charter.
- Where it is kept: who owns the data, where it is archived and who may use it.
Permissions
At monuments, museums and palaces run by Museus e Monumentos de Portugal, filming needs authorisation from that body. For a church, the first step is the owner, the parish or the diocese, and if the church is listed it is wise to involve the relevant heritage authority too. For drone captures, the AAN authorisation always applies. Lead times vary, so it is worth asking weeks ahead.
Where to start
Start with a question: what is the record for? Preservation, public access, supporting building works or teaching? The answer decides the method, the accuracy and the budget. Then a pilot site, ideally the one most at risk or the one most people want to see. We describe how we work on site in how to 3D scan a historic building. If you manage heritage and want to start, see our 3D capture service or talk to us.
FAQ
How much does it cost to digitise a monument in 3D?
It depends on the area, the method and the accuracy. A walkable tour of a small space starts in the hundreds of euros; a laser survey of a whole monument, with exterior and drone, is a custom project. The general ranges are in our virtual tour pricing guide.
Does a 360° virtual tour count as a heritage record?
It works for showing and giving access, but it doesn't replace a laser or photogrammetric survey when you need accurate measurements, to monitor decay or to support building works. Often both are done in the same capture.
Do I need permission to digitise a church?
You need the agreement of the owner, usually the parish or the diocese, and if the church is listed it is wise to involve the relevant heritage authority. If you use a drone, you also need the AAN authorisation to capture images.
Tell us what was only ever described.
or write to info@amplifiedcreations.com · a senior member of the team answers